Idromar watermaker MC2V 130 lt/h – Vertical version
Idromar model MC2V is supplied on a single and compact vertical frame and can produce 130 lt/h.
Idromar watermakers produced by high quality of components and materials. Τhe wide range can meet the needs of every yacht.
In case of limited available space on board, the system can be supplied as decomposed horizontal or vertical version.
Prodution: 130 lt/h
Consumption: 1.5 kW
Dimensions (LxDxH): 35x35x70cm (without membranes and the pre-feed pump).
- Description
- Reviews (0)
Description
Idromar model MC2V is supplied on a single and compact vertical frame and can produce 130 lt/h.
Idromar watermakers produced by high quality of components and materials. Τhe wide range can meet the needs of every yacht.
In case of limited available space on board, the system can be supplied as decomposed horizontal or vertical version.
Prodution: 130 lt/h
Consumption: 1.5 kW
Dimensions (LxDxH): 35x35x70cm (without membranes and the pre-feed pump).
Be the first to review “Idromar watermaker MC2V 130 lt/h – Vertical version”
Related Products
-
Read moreQuick ViewHP Watermaker SCE ECO 35
HP SCE ECO 35 is supplied on a single and compact frame, it is equipped with 1 membrane 2521 and can produce 35 lt/h.
It is supplied with separate booster pump.
SCE is the most economic series. However, it is not less efficient than the others. SCE 35 watermaker is fully manual and is the best choice for a reliable and economic watermaker.
In case of no space on board, the system can be supplied as kit in preassembled and tested separated parts (split).
Read moreQuick View -
Read moreQuick View20″ Sea water filter cartridges BB (big blue)
20″ Sea water filter cartridges BB (big blue).
Pre-filter cartridge for watermakers
5, 10, 20 or 25 micron available
Read moreQuick View -
Read moreQuick ViewHP Watermaker SCE ECO 70
HP SCE ECO 70 is supplied on a single and compact frame, it is equipped with 2 membraneS 2521 and can produce 70 lt/h.
It is supplied with separate booster pump.
SCE is the most economic series. However, it is not less efficient than the others. SCE 70 watermaker is fully manual and is the best choice for a reliable and economic watermaker.
In case of no space on board, the system can be supplied as kit in preassembled and tested separated parts (split).
Read moreQuick View -
Read moreQuick ViewPush-In fittings for watermakers
Stainless Steel Push-In fittings, commonly used for watermakers or other plumbing purposes.
Mostly used for Idromar watermakers.Available dimension: 3/8″ or 1/2″
Read moreQuick View -
Read moreQuick ViewHP Watermaker V 440/4 AUTO
HP V 440/4 AUTO is supplied on compact vertical frame and can produce 440 lt/h with 4 membranes 31540. It is equipped with automatic membrane flushing and remote control.
The HP V 440 answers to the demands of compactness on board. The vertical design of the plant allows to fit the system in tight places. The frame base of the HP V is only 470 mm X 280 mm, and the height is 600 mm. These dimensions are referred to the body of the watermaker that in this case does not include the membranes, that can be easily be installed vertically or horizontally everywhere.
HP V Auto series produced by high technology and quality of components and materials. Τhe wide range can meet the needs of every yacht.
Read moreQuick View -
Read moreQuick ViewFilmtec SW R/O membrane element
P/N SW 30 2521
P/N SW 30 2540
P/N SW 30 4040
Membrane element for watermakersRead moreQuick View -
Read moreQuick ViewHP Watermaker SCE ECO 140
HP SCE ECO 140 is supplied on a single and compact frame, it is equipped with 1 membraneS 31540 and can produce 140 lt/h.
It is supplied with separate booster pump.
SCE is the most economic series. However, it is not less efficient than the others. SCE 140 watermaker is fully manual and is the best choice for a reliable and economic watermaker.
In case of no space on board, the system can be supplied as kit in preassembled and tested separated parts (split).
Read moreQuick View -
Read moreQuick ViewHP Watermaker V 260/2 AUTO
HP V 260/2 AUTO is supplied on compact vertical frame and can produce 260 lt/h with 2 membranes 31540. It is equipped with automatic membrane flushing and remote control.
The HP V 260 answers to the demands of compactness on board. The vertical design of the plant allows to fit the system in tight places. The frame base of the HP V is only 470 mm X 280 mm, and the height is 600 mm. These dimensions are referred to the body of the watermaker that in this case does not include the membranes, that can be easily be installed vertically or horizontally everywhere.
HP V Auto series produced by high technology and quality of components and materials. Τhe wide range can meet the needs of every yacht.
Read moreQuick View -
Read moreQuick ViewHP Watermaker SC 260/2 AUTO
HP SC 260/2 AUTO is supplied on a single and compact frame and can produce 260 lt/h with 2 membranes 31540. It is equipped with automatic membrane flushing and remote control.
SC Auto series produced by high technology and quality of components and materials. Τhe wide range can meet the needs of every yacht.
In case of no space on board, the system can be supplied as kit in preassembled and tested separated parts (split).
Read moreQuick View -
Read moreQuick ViewPlastic hose for watermakers
Approved plastic hose for watermakers
Dimmensions: 10 mm, 12mm, 1/4″, 3/8″ and 1/2″
Read moreQuick View
Reviews
There are no reviews yet.